AP54RHC288

Radiation Hardened Dual 2-input Arbiter

Sampling Now

AP54RHC288

Datasheets

Product Overview

The AP54RHC288 is a radiation-hardened by design Two-Channel Dual-Input Arbiter that is ideally suited for space, medical imaging and other applications demanding radiation tolerance and high reliability. It is fabricated in a 180 nm CMOS process utilizing proprietary radiation-hardening techniques, delivering high
resiliency to single-event effects (SEE) and to a total ionizing dose (TID) up to 30 krad (Si).

The AP54RHC288 provides protection for critical applications by ensuring that on each channel only one output can be high, regardless of the signal state at the inputs. This feature is ideal for half-bridge drivers, power supplies, thrusters, and other applications where crossconduction must be avoided. This device is a member of the Apogee Semiconductor AP54RHC logic family operating across a voltage supply range of 1.65 V to 5.5 V.

Zero-power penalty™ cold-sparing is supported, along with Class 2 ESD protection on all inputs and outputs. A proprietary output stage and robust power-on reset (POR) circuit allow the AP54RHC288 to be cold-spared in any redundant configuration with no static power loss on any pad of the device. The redundant output stage also features a high drive capability with low static power loss.

The AP54RHC288 also features a triple-redundant design throughout its entire circuitry, which allows it to be immune to single-event transients (SET) without requiring additional redundant devices.

  • 1.65 VDC to 5.5 VDC operation
  • Inputs tolerant up to 5.5 VDC at any VCC
  • Provides logic-level down translation to VCC
  • Extended operating temperature range (-55 °C to +125 °C)
  • Proprietary cold-sparing capability with zero static power penalty
  • Built-in triple redundancy for enhanced reliability
  • Internal power-on reset (POR) circuitry ensures reliable power up and power down responses during hot plug and cold sparing operations
  • Tri-state output drivers
  • Class 2 ESD protection (4000 V HBM, 500 V CDM)
  • TID resilience of 30 krad (Si)
  • SEL resilient up to LET of 80 MeV-cm2/mg
  • LEO Constellations
  • Small satellites
  • Medical Imaging

Order

Part NumberPedigreePackagePinsBurn-InLead FinishTID kRad (Si)SEL MeV/mg/cm2RFQPurchase
AP54RHC288ELT-W EvaluationTSSOP14NoSnPb3080Contact UsContact Us
AP54RHC288BLT-RFlightTSSOP14NoSnPb3080Contact UsContact Us
AP54RHC288ALT-RFlightTSSOP14YesSnPb3080Contact UsContact Us

Development Boards

Contact Us for information on available development boards

If you don’t see what you need, please let us know by contacting us at sales@apogeesemi.com

Contact Us

15 + 15 =

Apogee Semiconductor
840 Central Parkway East, Suite 140
Plano, TX 75074

Privacy Policy     •     Terms of Sale     •     Cookie Policy
© 2023 Apogee Semiconductor All Rights Reserved